How to Reset Husqvarna Viking Dishwasher

To Reset a Husqvarna Viking Dishwasher, please follow these steps:

1. Turn off the dishwasher by pressing the “Power” button or unplugging it from the electrical outlet.
2. Wait at least 5 minutes for the control board to reset.
3. Reconnect the power or turn the dishwasher back on using the “Power” button.
4. Press and hold the “Start” button for approximately 5 seconds or until the dishwasher starts a reset sequence.
5. Allow the dishwasher to complete the reset sequence, which usually takes a few minutes.

Why and When to Reset Husqvarna Viking Dishwashers

Settings King, a blog about technology settings, understands that there are times when your Husqvarna Viking dishwasher may require a reset. Resetting your dishwasher may be necessary if it is not functioning properly, or if you’ve experienced a power surge or outage. Our guide on how to reset dishwashers is designed to provide you with the information you need to get your appliance back to optimal performance.

Common Issues that Warrant a Reset

• Dishwasher not starting
• Error codes
• Malfunctioning control panel

Error Codes That Indicate a Reset is Necessary

Some Husqvarna Viking dishwasher models will display error codes when there is a problem. If you encounter any of the following error codes, a reset may resolve the issue:

• E1: Water supply issue
• E2: Water drain issue
• E3: Water heating issue
• E4: Water overfill

Additional Troubleshooting Tips

Check Connections and Power Supply

Before attempting to reset your dishwasher, ensure that the appliance is properly connected to the electrical outlet, and that there are no issues with the power supply.

Inspect Water Inlet and Drain Hoses

If you encounter water supply or drain-related error codes (E1 or E2), inspect the inlet and drain hoses for kinks or blockages, and ensure they’re properly connected.

Reset Your Dishwasher with Confidence

By following the steps and using the information provided by Settings King, you’ll be equipped with the knowledge necessary to reset your Husqvarna Viking dishwasher effectively and efficiently.

Frequently Asked Questions About Resetting Husqvarna Viking Dishwashers

We understand that after reading our blog post on how to reset your Husqvarna Viking dishwasher, you might still have some questions. We’ve compiled a list of frequently asked questions and their answers to help clear up any remaining uncertainties.

Does resetting the dishwasher fix all error codes?

While resetting can resolve many issues, it may not fix all error codes. In some cases, you may need to consult your dishwasher’s user manual or contact a technician for further assistance.

Can I reset my dishwasher during a cycle?

Yes, you can reset your dishwasher during a cycle. However, it is generally recommended to wait for the cycle to finish before performing a reset, to avoid any potential complications.

What if my dishwasher doesn’t have a digital display?

If your dishwasher lacks a digital display, you may still attempt a reset by following the steps listed in our guide. You just won’t receive an error code notification, but the reset can still resolve many issues.

How often should I reset my dishwasher?

Resetting your dishwasher should be done only when you experience problems or error codes. Regularly resetting it without a cause might not be necessary and could potentially cause more issues in the long run.

Will I lose my customized settings if I reset my dishwasher?

When resetting your dishwasher, you may lose any customized settings you have created. It’s important to make a note of your preferred settings to reapply them after the reset is complete.