How to Reset AEG Dishwasher

To reset an AEG Dishwasher, please follow these steps:

1. Turn off the dishwasher by pressing the power button or disconnecting it from the power source.
2. Wait for at least 30 seconds for the machine to reset internally.
3. Reconnect the dishwasher to the power source or turn it back on by pressing the power button.
4. Press and hold the “Program” button for about 10 seconds until the display shows “0:00” or similar.
5. Release the button, and the dishwasher should now be in reset mode.
6. Select a new cycle and start the dishwasher to complete the resetting process.

When to Reset AEG Dishwashers

Resetting your AEG dishwasher becomes necessary under various circumstances. For instance, if you notice a decline in performance, unusual error codes, or your dishwasher refuses to start a cycle, it’s time to reset. A reset can resolve these issues and restore your dishwasher’s functionality.

Why Resetting AEG Dishwashers Is Important

At Settings King, a blog about technology settings, we believe that resetting your dishwasher can help tackle any glitches or malfunctions. By resetting your AEG dishwasher, you’re essentially restarting the device, clearing any existing settings or errors, and bringing it back to factory defaults. This helps eliminate potential technical issues and guarantees improved performance and longevity.

Error Codes That Prompt a Reset

Common Error Codes

For AEG dishwashers, specific error codes might prompt you to perform a reset:

• Error Code 10 (i10) – Insufficient water in the dishwasher.
• Error Code 20 (i20) – A blockage in the drain or filter.
• Error Code 30 (i30) – Issue with the anti-flood device.
• Error Code 50 (i50) – A fault in the wash motor.
• Error Code 60 (i60) – Problem with the heating mechanism.
• Error Code 90 (i90) – Issue with the water inlet valve.

Note that these are just a few examples; other error codes may also need a reset.

Unusual Error Codes

If your AEG dishwasher displays an error code that is unclear or not mentioned in your user manual, your first step should be to reset the device to see if it clears up the issue. If the error persists, contact AEG customer support for further assistance.

Additional Troubleshooting Tips for AEG Dishwashers

Besides resetting your dishwasher, there are other helpful troubleshooting tips to ensure your appliance performs at its best, as recommended by Settings King:

• Regularly clean the filters to remove any debris that could clog the drain and impede the dishwasher’s ability to clean properly.
• Inspect and clean the spray arms, ensuring that the water jet holes are clear of obstructions.
• Always use high-quality dishwasher detergent and rinse aid to maintain the effectiveness and longevity of your dishwasher.

In conclusion, learning how to reset dishwashers and performing basic troubleshooting are crucial steps in ensuring the optimal performance of your AEG dishwasher.

FAQ Section

If you’re looking for additional information after reading our blog post on resetting AEG dishwashers, this FAQ section is here to help. We have compiled some common questions people may ask, and we provide concise and direct answers to assist you further.

What should I do if my dishwasher does not reset?

If your AEG dishwasher fails to reset, double-check your power source and try the reset process again. If the issue persists, contact AEG customer support or a qualified appliance technician for assistance.

My dishwasher has been reset, but the error code is still showing. What’s next?

If the error code persists after resetting, it may indicate a more serious issue with your dishwasher. Consult your user manual for further troubleshooting information and contact AEG customer support or a technician for help.

How often should I reset my dishwasher?

Resetting should be done only when necessary, such as when you encounter problems with your dishwasher’s performance, unusual error codes, or the appliance not starting a cycle. Regular maintenance helps avoid the need for frequent resets.

Can I reset my AEG dishwasher during a running cycle?

Resetting your dishwasher during a cycle is not recommended, as it can lead to water leakage and other potential issues. If you need to reset during a cycle, thoroughly review your user manual or consult AEG customer support for guidance.

Will resetting my dishwasher erase my customized settings?

Resetting your AEG dishwasher will bring it back to its factory default settings, which means your customized settings, if any, will be erased. You will need to reapply any preferred settings after the reset is complete.